Why It’s Useful
- Backflow prevention
- One-way fluid control
- Water system regulation
- Durable plumbing components
KVI_500 - DN/OD 450
Regular price
£3,117.00
Hurry up! Only 20 items left in stock
KVI 180–630 is a flap valve designed for installation in existing plastic, concrete, or steel pipes (ID to be specified when ordering).
It is used to prevent backflow, for example at the outlet from sewer systems to open channels or pump stations. The flap can be installed both above and below the water surface.
The flap is angled at less than 15° and mounted in a maintenance-free rubber hinge with embedded fabric reinforcement.
This design ensures low hydraulic resistance in the flow direction, while a flexible seal provides reliable closure in the event of backflow. The valve seals against the existing pipe using dual rubber rings.
KVI 180–630 is made of corrosion-resistant materials and contains no mechanical components.
It is easy to install, requires minimal maintenance, and offers smooth opening in the flow direction with secure closure against reverse flow.
Applications: Sewer systems, channels, and pump stations.
Operation: Automatic flap in rubber hinge.
Technical specification
| Nominal diameter | DN/OD 450 (NPS/OD 18) |
| Opening Pressure | 63 mm H₂O (2.5 inh2o) |
| Pressure | 5 m H₂O (16.4 fth2o) |
| Weight | 34 kg (75 lb) |
| Height center opening (H2) | 283 mm (11.1 in) |
| Total Height (Ht) | 618 mm (24.3 in) |
| Valve body length (L) | 641 mm (25.2 in) |
| Length Open (L2) | 1015 mm (40 in) |
| Outer Ø (OD) | 500 mm (19.7 in) |
| Outer Ø min. (Od_min) | 450 mm (17.7 in) |
| V | 60 ° (60 °) |
| Width | 560 mm (22 in) |
| Operating Temperature | -25° C - +40° C |
| Watertightness | DIN 19569-4 table no. 1 Class 5 |
| Valve body | Polyethylene (PE) |
| Flap | Polyethylene (PE) |
| Flap seal | EPDM |
